Dahua Bridge Mode. dahua VTS5340B Digital VTS IP Master Station User Guide Select a bridge, press the F key to make "H" or "C" flash, and then press the S key to change it to "H" Any cameras connected to the POE Ports of the NVR when Bridge Mode is on will need to have their IP address set manually to match the LAN network card as automatic DHCP is not available.
Dahua VTO3211DP4S1 Super IP 4button Villa Outdoor Station from rxtx.com.au
I have a 4K night camera connected to one port which uses up to 9W at night Current setup is with bridge mode disabled with Dahue NVR5216-16P-4KS2E and 10 Dahue cameras (ie I used the NVR camera auto-configure for the initial setup long ago.)
Dahua VTO3211DP4S1 Super IP 4button Villa Outdoor Station
Select a bridge, press the F key to make "H" or "C" flash, and then press the S key to change it to "H" The POE rating on each port is 25.5W which isn't the issue 1- Fire up NVR using a mouse and monitor to do the initial setup, security questions, password, leave default Networking/IP alone (Verify it is static IP at 192.168.1.108 - assuming a standard home network of 192.168.1.x ), If you wish you could change the NVR IP address to some other static number on the 192.168.1.x network, This might be.
Dahua Bridge Mode Turn your NVR into a PoE switch to power up more. How to Configure a Dahua NVR's Built in PoE Switches Network SettingsIn this video, we demonstrate how to log into a Dahua NVR and configure the network sett. Select a bridge, press the F key to make "H" or "C" flash, and then press the S key to change it to "H"
[USD 124.14] Dahua elevator dedicated transmission WIFI bridge. On my dahua nvr I have only ever used the Poe ports in bridge mode. Note: The equipment IP is unique within the same LAN, so pay attention to modify the IP address according to the design and make sure IP won't conflict within the same